Anyconnect profile editor windows

If it cannot detect a captive portal, a connect failure closed policy prevents all network connectivity. If you deploy a closed connection policy, we highly recommend that you follow a phased approach. For example, first deploy Always-On VPN with a connect failure open policy and survey users for the frequency with which AnyConnect does not connect seamlessly.

Then deploy a small pilot deployment of a connect failure closed policy among early-adopter users and solicit their feedback. Expand the pilot program gradually while continuing to solicit feedback before considering a full deployment. As you deploy a connect failure closed policy, be sure to educate the VPN users about the network access limitation as well as the advantages of a connect failure closed policy.

Related Topics: About Captive Portals. If Connect Failure Policy is Closed, then you can configure the following settings:. Allow Captive Portal Remediation —Lets AnyConnect lift the network access restrictions imposed by the closed connect failure policy when the client detects a captive portal hotspot. Hotels and airports typically use captive portals to require the user to open a browser and satisfy conditions required to permit Internet access.

By default, this parameter is unchecked to provide the greatest security; however, you must enable it if you want the client to connect to the VPN if a captive portal is preventing it from doing so. Remediation Timeout —Number of minutes AnyConnect lifts the network access restrictions. This parameter applies if the Allow Captive Portal Remediation parameter is checked and the client detects a captive portal.

Specify enough time to meet typical captive portal requirements for example, 5 minutes. If you uncheck this checkbox, the VPN connection choices are only those in the drop-down box, and users are restricted from entering a new VPN address.

The client can exclude traffic destined for the secure gateway from the tunneled traffic intended for destinations beyond the secure gateway. If you make this feature user controllable, users can read and change the PPP exclusion settings.

Automatic—Enables PPP exclusion. Instruct users to change the value only if automatic detection fails to get the IP address. Disabled—PPP exclusion is not applied.

Override—Also enables PPP exclusion. Terminate Script On Next Event —Terminates a running script process if a transition to another scriptable event occurs. On Microsoft Windows, the client also terminates any scripts that the OnConnect or OnDisconnect script launched, and all their script descendents. Authentication Timeout Values —By default, AnyConnect waits up to 12 seconds for an authentication from the secure gateway before terminating the connection attempt.

AnyConnect then displays a message indicating the authentication timed out. Enter a number of seconds in the range of 0 to You can configure a list of backup servers the client uses in case the user-selected server fails. If that fails, the client attempts each remaining server in the Optimal Gateway Selection list, ordered by its selection results. Those servers configured in the Server List take precedence, and backup servers listed here are overwritten.

Add —Adds the host address to the backup server list. Move Up —Moves the selected backup server higher in the list. If the user-selected server fails, the client attempts to connect to the backup server at the top of the list first, and moves down the list, if necessary. Move Down —Moves the selected backup server down in the list. Delete —Removes the backup server from the server list.

Enable the definition of various attributes that can be used to refine automatic client certificate selection on this pane. If no certificate matching criteria is specified, AnyConnect applies the following certificate matching rules:. Extended Key Usage: Client Auth. If any criteria matching specifications are made in the profile, neither of these matching rules are applied unless they are specifically listed in the profile.

Key Usage —Use the following Certificate Key attributes for choosing acceptable client certificates:. The OIDs are included in parenthesis:. ServerAuth 1. ClientAuth 1. CodeSign 1. EmailProtect 1. IPSecEndSystem 1. IPSecTunnel 1. IPSecUser 1. TimeStamp 1. OCSPSign 1. DVCS 1. A certificate must match all of the specified key s you enter. Enter the key in the OID format for example, 1. The limit for the maximum characters for an OID is Distinguished Name Max 10 :—Specifies distinguished names DNs for exact match criteria in choosing acceptable client certificates.

Name —The distinguished name DN to use for matching:. Pattern —Specifies the string to match. The pattern to be matched should include only the portion of the string you want to match. There is no need to include pattern match or regular expression syntax. If entered, this syntax will be considered part of the string to search for. For example, if a sample string was abc. Operator —The operator to use when performing matches for this DN.

Not Equal—equivalent to! Wildcard —Enabled includes wildcard pattern matching. With wildcard enabled, the pattern can be anywhere in the string. Match Case —Check to enable case-sensitive pattern matching. Certificate Expiration Threshold —The number of days before the certificate expiration date that AnyConnect warns users their certificate is going to expire not supported by RADIUS password-management.

The default is zero no warning displayed. The range of values is zero to days. Certificate Import Store —Select which Windows certificate store to save enrollment certificates to. For example, the hostname asa. When the user clicks Get Certificate , the client prompts the user for a username and one-time password.

Thumbprint —The certificate thumbprint of the CA. Name CN —Common Name in the certificate. Department OU —Department name specified in certificate. Company O —Company name specified in certificate.

State ST —State identifier named in certificate. State SP —Another state identifier. Country C —Country identifier named in certificate. Email EA —Email address. Domain DC —Domain component. In the following example, Domain DC is set to cisco.

SurName SN —The family name or last name. GivenName GN —Generally, the first name. UnstructName N —Undefined name. Initials I —The initials of the user. When a profile is created, it needs to get pushed to the end user's device. There are three ways to do this. Through the AnyConnect server MX : If profiles are configured on the dashboard, the MX will push the configured profile to the user's device after successful authentication.

Profiles can also be pushed to the following paths:. Manually: Profiles can also be preloaded manually to the same paths as listed above. The profile editor can be downloaded from the AnyConnect Settings page on dashboard or on cisco. Refer to this link for more details on AnyConnect profiles. The profile editor only runs on Windows operating systems. The screenshot below shows a configured server ton the Server List Entry option.

When configuration is complete, save the profile. It is recommended to use a unique file name to avoid profile overrides by other AnyConnect servers, t hen you can upload the file to the profile update section on the AnyConnect settings page. Go to Solution. Perhaps you have misconfigured something there. View solution in original post. Hi Anthony O'Reilly ,. ISe posturing needs to be deployed yesterday so the plan is to upgrade AnyConnect at the start of next year.

AnyConnect was installed on the client, there were no options to add in call home list etc Where do I put this file? The info Marcelo Morais shared is accurate. Any luck with DART bundle logs? I have utilized bundles in the past to point me in the right direction to fix an issue. I am having the same issue. But the thing is, when we tried with a Web-Deploy approach with URL redirection, client download the AnyConnect and installed, it is working as expected with the compliance checking and all.

But for web-deploy is working but not pre-deploy. You can download the Posture policy editor, create the config file and deploy this file to your device s via GPO, SCCM or whatever way suits your organisation.

Thank you for the fast reply. Correct me if im wrong, so the profile editor is to create the config file. Does the. You have the ability to import. Also deployed on the right path on the clients but the issue remains with "No Policy Server Detected". For your insights, we are trying to implement both types of deployment.

Using Web-Deploy. One is for the pre-deploy by importing customer created package and one more is created directly from the Resources. And how do actually Anyconnect select the profile on ISE and match. Description Please direct any questions, feedback or problem reports to ac-mobile-feedback cisco. Show More. People also like. Microsoft Authenticator Free.

Windows Insider Free. Firmware Update Check - Update assistant for legacy Win. Upgrade WP Free. Additional information Published by Cisco Systems. Published by Cisco Systems. Copyright Cisco Systems, Inc. Developed by Cisco Systems, Inc.